Table of Contents
Advertisement
Rev. 2021-07-01 OkuStim System
TD60K06 -
03
4
Brief Guide to Performing a Therapy Session
Please follow exactly the steps to prepare and conduct a stimulation session. You may other-
wise experience a spontaneous and strong phosphene perception.
Preparation before stimulation:
•
Clean the skin before attaching the OkuEl counter electrode(s).
•
Attach the OkuEl counter electrode(s) to the cleaned skin area(s).
•
Insert the OkuEl electrode(s) into the electrode holder of the OkuSpex.
•
Assume a comfortable and stable seated or reclined position.
•
Put on the OkuSpex. You may want to pass the cable of the OkuSpex from behind around
your head.
•
Switch on the OkuStim.
•
Plug the OkuSpex cable into the OkuStim.
•
Connect the OkuEl counter electrodes to the cables on the OkuSpex.
•
Start the stimulation. It is recommended to keep the eyes closed during stimulation.
After stimulation
•
The stimulation stops automatically after 30 minutes.
•
Carefully remove the pushbutton connectors from the OkuEl counter electrodes. Never
pull the cables to remove the connectors as the cables may tear.
•
Disconnect the OkuSpex cable from the OkuStim.
•
Take off the OkuSpex and remove the electrodes from it.
•
Put the OkuSpex back into the box. Do not fold the OkuSpex.
•
Roll-up the cable loosely and do not wrap it around the OkuSpex as this may cause the
electrode holders to misalign. Put it into the designated compartment in the box.
•
Switch off the OkuStim device (in case it has not already switched off automatically).
•
Remove the counter electrodes from your forehead and dispose of them together with the
OkuEl eletrodes with the general waste.
12 36
Instructions for Use
Advertisement
Table of Contents
