Assembling The Camera - Nexar HaloCam Manual

ASSEMBLING THE CAMERA

1. Insert micro SD card into the micro SD slot on the camera until you hear a click
2. Insert the holder into the holder slot on the camera and slide to lock in place
(The SD card may be pre-slotted for you)
3. Remove sticker from camera lens
4. To turn camera on and off, single tap the POWER button.
Double tapping the POWER button might interrupt the camera's WiFi connection.
Hold camera with lens
facing downwards
ATTENTION: Do NOT remove the micro SD from the camera while camera is ON. Doing
so may cause permanent damage to the camera! Turn camera OFF before ejecting card.
Insert micro SD card
with metal pins
facing upwards
| 5