Page 2
Operating outside these limits may result in decreased print quality of your models. 3. NEW X1 generates high temperatures as the nozzle can reach up to 300°C (572°F) and the build plate up to 100°C (212°F) that can cause injury.
Page 4
PLA/ABS/Nylon/PETG/Carbon/PC/TPE/TPU Printable (Shore 50A material) Flexible Material Structure Direct Extruder Extruder Type Driver Infinity3DP GT80 XY Axis Caged Ball Linear Guide (Made in Taiwan) 4-Row Ball Bearing Linear Guide Z Axis T8 Anti-Backlash Lead Screw (Made in Taiwan) Electronic Control igus Chainflex®...
Page 5
PANEL 1. Stepper Motor of X Axis 7. Heat Bed 13. Control Knob 2. Stepper Motor of Z Axis 8. Stepper Motor of Y Axis 14. Belt Tensioner of X Axis 3. Handle 9. Limit Switch of Z Axis 15. Power Interface 4.
※The glass plate, with red tape indicates the place for binder clips, is the print surface for prints. 2. Slightly glue on build plate for aiding in print adhesion. 3. Plug the power cable in the wall socket and connect to the NEW X1. 4. Control > Set Temp > Nozzle / Bed Place it and wait till the instructed temperature, it’s about to start your print!
PANEL ※Be aware of the operation is during heating procedure. STEP 5 LOADING FILAMENT 1. Place the filament onto the filament rack.(Photo A) 2. Press the feeder button for inserting the filament.(Photo B) 3. Take the end of the filament, insert it into the bottom of the feeder. Push the filament until it grabbed by the knurled wheel.(Photo C) 4.
Page 9
STEP 2 START TO PRINT 2. NEW X1 will prepare itself by heating up the nozzle and build plate. While heating up to the instructed temperature, the build plate would automatically closer to the nozzle as ready to print.
Page 10
PANEL STEP 3 COMPLETION 3. When finished, wait for the build plate to cool down. ※Please be sure to take the build plate out of the machine, so you can grab the object from it.
PANEL MAIN MENU PRINT STATUS Print Speed Fan Speed Z:243.47 N1: 26° Print File moai-new.gcode Nozzle Z Axis Height Temperature TIME: 00:00 Time HB: 27° N2: X Print Status Heat Bed Temperature Print Procedure Menu Tree Main Menu Prepare Print From SD Control About Printer .gcode...