Related Manuals for Andreani Group MISANO
Summary of Contents for Andreani Group MISANO
- Page 1 Andreani Group MISANO cartridge kit installation manual RACE USE ONLY Unscrew the upper cap of the fork, take off the spring, the spacer and take off the oil inside it. (Pic. 1 and 2).
- Page 2 Separate the innertube from the outertube. Unscrew the cap from the innertube that closes the spring. Take off the spring and and its parts included. Unscrew the axle clamp from the innertube. (picture 3). Take off the washer and o- ring (picture 4).
- Page 3 Screw back in the innertube to the axle clamp (picture 7) and insert the Andreani damper into the innertube and screw it in the plate previously sobstituted. ( Picture8 ). Procede with assembly of the outertube and the oil level as indica- ted on the label outside the box, where the code of the kit is.
- Page 4 Standard Setup up Compression 2 turns (From fully closed to open) Rebound 2 turns (From fully closed to open) Springs preload 4 turns (from fully open to close)
Need help?
Do you have a question about the MISANO and is the answer not in the manual?
Questions and answers