How And When To Add Sodium Bromide - BluWater Technology Genesis Blu Fusion User Manual

How and when to add Genesis TRU BLU Salt (NaBr
Sodium Bromide):
Genesis BLU FUSION uses Genesis TRU BLU, a 99% pure, granular SODIUM
BROMIDE. Once it has been added to the spa Sod ium Bromid e levels
typically remain stable
bromide into free Bromine perpetually.
added at a rate of 1.2 pounds per 100 gallons or 0.143 kg
Tru Blu should be
per 100 Litre s of spa wate r
is 1300-1500 PPM/mg/L.
You add this once at start up and typically should not be re dosed until the spa is
drained and refilled.
Use a BROMINE TEST KIT to test bromine levels regularly!
once added. The
at start up. The id eal Sodium Bromide level
Be careful not to overdose the spa.
TESTING YOUR WATER FOR SODIUM BROMIDE
In order to ensure the Sodium Bromide level has been correctly
added, use the Tru Blu Sodium Bromide test (provided).
Once the sodium bromide has been added at the correct levels,
Testing for Tru Blu does not need to be checked regularly. The
purpose is to verify Sodium Bromide levels are in proper range at
start up or If there is an error code.
See illustration to the left: This test is not instant and will take a few
minutes ... The ideal Sod ium Bromide level is 1300-1500 PPM/mg/L.
SODIUM BROMIDE IS NOT BROMINE; IT IS SIMPLY BROMIDE SALT!
Bromine should be maintained between 3-5PPM
Genesis
Generator converts sodium
10
BLU FUSION User Manual