Troubleshooting For Motors - IGGOO Aqua BL809 User Manual

Troubleshooting

Troubleshooting for Motors

code
Error
L01x
Fan overloaded
L0x1
Left wheel overloaded
L0x2
Right wheel overloaded
L0x3
Left and right wheel overloaded
L0x4
Left side brush overloaded
L0x5
Left wheel and left side brush overloaded
L0x6
Right wheel and left side brush overloaded
L0x7 Left and right wheel, left side brush overloaded
L0x8
Right side brush overloaded
L0x9
Left wheel and right side brush overloaded
L0xA Right wheel and right side brush overloaded
L0xB
Left and right wheel, right side brush overloaded
L0xC
Left and right side brush overloaded
L0xD
Left wheel, left and right side brush overloaded
L0xE Right wheel, left and right side brush overloaded
Left and right wheel, left and right side brush
L0xF
overloaded
L02X
Roller brush overloaded
Note: If above solution not work, please try below:
1. Reset the robot by powering off it and then turn on it, and check again.
2. If it still not works after reset the robot, contact the after sales.
3. UV light might hurt your eyes, please not look at it when it is be on status.
Cause
18
Solution
Check if fan is pressed, and clean
dust bin
Check if it's stuck or wired by
obstacles