Product Operation; Battery Charging - IGGOO Aqua BL809 User Manual

Product Operation

Battery Charging

1. Charging home base placement
Place charging home base against the wall and
remove obstacles about 1 meter at two sides and
about 2 meters front of charging home base.
2. If the robot is powered off, to power on the robot by pressing the power switch at the right side of
the robot.
3. Charge the robot in either way as shown below:
a. Plug the adapter into the robot and the other end to power socket as shown in Fig.a.
b. Press
base for recharging as shown in Fig.b.
Note:
a. When robot is charging, LED panel will gradually show "11:11" from left to right.
b. Once charging is completed, LED panel will show "FULL".
c. In the standby status, the robot will speech "Please charge" and LED panel will show "
d. In the working status, the robot will return to charging home base automatically when battery power
is low and LED panel will show "
For the sake of extending battery's usage life:
a. Before first use, charge the robot for 12hrs.
b. Charging the robot as soon as battery power is low.
c. The robot will return to charging home base automatically when accomplish cleaning or battery
power is low.
d. If the robot is not to be used for a long time, fully charge the battery, turn the power switch off,
remove and store it in a cool, dry place.
e. If the robot is not to be used more than 3 months, charge it directly by power adapter for 12hrs.
on robot or HOME on remote control to operate the robot to go to charging home
Fig. a
".
9
Fig. b
".