Starting Up/Standby/Sleeping/Power Off - IGGOO Aqua BL809 User Manual

Product Operation
Starting Up / Standby / Sleeping / Power Off
1. Starting Up
a. Make sure the power switch is on.
b. In standby mode, press
Note: If robot is in sleeping mode, press
wake up the robot from sleeping mode, then press
automatically.
2. Standby
Standby is meant that the robot is powered on, but to be operated by users, to change the robot
from cleaning mode to standby mode in either way as shown below:
a. In cleaning mode, press
b. Press the ON/OFF on remote control to stop the robot.
3. Sleeping
In sleeping mode, the robot can only be waken up from
remote control in order to save power. To turn the robot into sleeping mode from standby mode:
a. Keep pressing
b. Robot will automatically enter sleeping mode if there is no command received for more than 60
seconds.
4. Power Off
Power off is meant that the robot is powered off. Press the power switch button can cut off the
power.
on main body or ON/OFF on remote control to start cleaning.
on main body.
for more than 3 seconds.
10
on main body or ON/OFF on remote control to
again, the robot will start cleaning
on main body or ON/OFF on