K-TOR POWER BOX Instructions page 3

SETUP
The generator can be operated with two hands or two feet
and should be spun in a forward bicycle motion.
Mounting holes in the generator feet can be used to screw
down or stake down the unit for a more stable base. This is
highly recommended.
MOUNTING HOLE
READY
Position yourself, so that your hands or feet are directly over
the generator. Apply downward pressure with feet (or hands)
to help hold the generator in place.
OUTLET FACING
AWAY FROM USER
DO NOT STAND ON THE GENERATOR OR PEDALS
- Make sure the pedals are on the correct crank shaft in the locked position
- Pull on the cranks to ensure they are locked on the shaft and will not come off
- Failure to lock the pedals correctly will damage the unit
- Ensure that the feet pins and base pin are fully inserted
- Make sure the unit is on a flat stable surface, preferably screwed down
- Verify that you have enough space to operate the generator
- Check the cord to make sure it will not get caught while operating
- Apply downward pressure to the pedals to hold generator in place
- Accelerate quickly to full speed 90 RPM (1.5 revolutions per second)
OPERATING IN GENERATOR MODE
1
MOUNTING HOLE
3
OPERATING SUMMARY
WWW.K-TOR.COM
2
Connect a compatible device and its charger directly to the
outlet in the K-TOR Power Box pedal power generator.
OPTION: You may also use an extension cord to connect the
unit to your charger. You may charge more tha one device at
a time as long as the total power does not exceed the 20 Watt
maximum rating of the pedal generator.
4
Crank in a forward bicycle motion, accelerating quickly to 90
RPM (1.5 rotations per second) for full power and efficient
operation.
ACCELERATE QUICKLY TO FULL SPEED 90 RPM
PLUG-IN
SPIN