CVS Health BF 720 Instructions For Use Manual page 6

User data
Initials/abbreviation of name
Height
Age
Gender
Activity level
To select the proper Activity Level, consult the table below.
Activity level Physical activity
1 None.
Low: little and light physical exertion (e.g. going for walks, light gardening, simple
2
gymnastics).
3 Medium: physical exertion, at least 2 to 4 times a week for 30 minutes each.
4 High: physical exertion, at least 4 to 6 times a week for 30 minutes each.
Very high: intensive physical exertion, intensive training or hard physical work for at
5
least 1 hour every day.
Assign the user when requested to do so by the app. For automatic personal recognition, the first
measurement must be assigned to your personal user data. Follow the app instructions for this. Step onto
the scale with bare feet and ensure that you are standing still with equal weight distribution and with both
feet on the electrodes.
Initial use without the app (alternative)
Note: We recommend using the app for initial use and implementing all settings. Therefore, only carry out
this step if initial use is to be carried out entirely without the app. If you have performed initial use with the
app, go directly to the "Taking measurements" chapter.
1. After inserting the batteries, "USE APP" will flash on the LCD display. Press the SET button to set the
year/month/day, as well as hour/minute.
To select a value, touch the / buttons and touch SET to confirm; "0.0" will then appear on the LCD
Display.
2. Touch SET again. The LCD Display will show "P-01" or the number of the user memory most recently
used. Select your user memory (P-01 to P-08) with the / buttons and touch SET button to confirm.
3. Implement your settings such as gender and initials, height, etc. Confirm each setting by touching SET.
4. The 4-digit user PIN appears when you are finished entering your details. This PIN is needed to log into
the app. "0.0" will then appear on the LCD Display, along with your initials.
NOTE: If you used the scale the first time without the app, you can add your existing scale user memory to
the "Beurer HealthCoach" app. This requires you to enter your 4-digit user PIN. This process is described
in the app.
To set automatic user recognition, the first measurement must be assigned to your personal user data; see
below for instructions.
Set values
Max. 3 letters or numbers
3 ft 3.5 in to 7 ft 2.5 in (100 to 220 cm)
10 to 100 years
Male ( ), female ( )
1 to 5
6