Troubleshooting - Fisher & Paykel DCS DishDrawer DD24DVT7 User Manual

Troubleshooting

20
US
CA
Problem
Unclean dishes
Foaming
Water leaking
Possible cause
Wash program unsuitable
for the load.
Spray arm unable to rotate.
Drawer overloaded/
incorrectly loaded.
Filter plate/drain filter is
incorrectly inserted.
Detergent put in the
wrong compartment of the
dispenser.
Excess food not removed
from dinnerware prior to
loading.
Unsuitable detergent.
Not enough detergent.
Spray arm holes are blocked. Clean the spray arm.
Filter plate/drain filter is
blocked.
Incorrect amount of
detergent.
Too much egg in the wash
load.
Rinse aid setting too high.
Rinse aid dispenser plug not
closed properly.
Drain hose disconnected
from waste pipe.
Water inlet hose not
properly connected.
Other leaks.
Rinse aid dispenser plug not
closed properly.
What to do
See your 'Quick start guide' for a suitable
wash program, or the soils were too heavily
baked on and dishes may need soaking.
Ensure no items are obstructing the spray
arm path.
Refer to the section on loading.
See section 'User maintenance instructions' .
Detergent must be placed in the large
compartment. See section 'Adding detergent'
for information.
Scrape all food scraps off dinnerware prior to
loading.
Use detergents suitable for automatic
dishwashers. See section 'Adding detergent'
for examples of suitable and unsuitable
detergents.
See section 'Wash programs and detergent
quantities' or follow the detergent
manufacturer's instructions.
Clean the filter plate and drain filter.
See section 'Wash programs and detergent
quantities' or follow the detergent
manufacturer's instructions.
Increase the amount of detergent.
Decrease the rinse aid setting.
Ensure that the rinse aid dispenser plug is
closed tight, with its hand grip pointing
straight ahead. See section 'Using rinse aid' .
Reconnect the drain hose to the waste pipe.
Ensure the inlet hose is connected securely.
Turn water and power supplies to the
dishwasher off. Call Customer Care or your
Authorised Service Centre. See your 'Service
and warranty' booklet for contact details.
Ensure that the rinse aid dispenser plug is
closed tight, with its hand grip pointing
straight ahead. See section 'Using rinse aid' .