Not observing can mean loss of warranty claims. 3.1 Safety Instruction 6. Operating The device HT-1210N is only to be used for its indicated purpose: ● 6.1 Switch ON the unit the measurement of flue gases, of combustion air and gas temperature.
1. HT-internal battery(standard scope of supply) Probe Display 2. HT-battery charge (standard scope of supply) 100V / 12 Vdc / 100mA Measurements from line power : Use the HT-1210N only with the HT power supply 100v / 12Vdc / 100mA 5.1 Prepare measurement Metal cone The HT-battery charger can be connected to the HT-1210N.
24.8 ℃ 6.Operating T-Amb 25.5 ℃ After measurement time, pump off and 6.1 Switch ON the unit CO 254ppm By pressing the -key the HT-1210N will be switched ON. beep for 2 sec. :Print/store/abort page HODAKA HT-1210N avelage Selftest follws. ↓auto...
6.4.1 Stored data P :Print-out Print 6.4.1.1 View stored date :Strage Store Stored data Abort :Back to main menu Device settings Service The last selected strage space is selected. Set CO alarm Store measurement :Selection of storage space Cust.1 View stored data :Storage :Select the function 10.01.´06 08:11...
6.4.1.2 Delate data 6.4.1.3 Measurement HT-1210N to PC : Select the function View last values Delate data : Start the function View stored data Measurem. HT=>PC :Select the function Delete data measurem HT =>PC :Start the function Memory info...
Set CO alarm International transportation cost is not include in guarantee. alarm3: 800ppm HODAKA CO., LTD shall not be liable for any loss or damage whatever arising from CO warn limits ppm content errors or any mis-use of this instrument.
Need help?
Do you have a question about the HT-1210N and is the answer not in the manual?
Questions and answers