Fisher & Paykel 9 Series Installation Manual page 15

6
shims
7
INSTALLING THE DRAWER
Ensure the custom panel is
correctly aligned and centered
before fixing to the tape as this
can only be done once.
Use shims (not supplied) to ensure
gaps are accurate.
Open the drawer fully, and remove
the T15 screws from both sides of
the door frame.
Slide the door frame up and off the
drawer.
8
9
Drill pilot holes into the custom panel
through the screw holes in the door
frame.
Be careful not to drill through the
panel.
Secure the custom panel to the door
frame with T15 wood screws (6x).
Slide the door frame back onto
the drawer and align the custom
panel vertically with surrounding
cabinetry.
Secure the door frame in place
with T15 screws.
15