Starting Engine - Yamaha F75 Owner's Manual

Hide thumbs Also See for F75:
Table of Contents

Advertisement

Available languages

Available languages

Operation
1
1. Air vent screw
2.
Firmly connect the other end of the fuel
hose to the joint on the fuel tank.
2
1. Fuel joint
2. Fuel hose
3.
Wipe up any spilled gasoline immediate-
ly with dry rags.
TIP:
Dispose of rags properly according to local
laws or regulations.
4.
Squeeze the primer pump, with the ar-
row pointing up, until you feel it become
firm. During engine operation, place the
tank horizontally, otherwise fuel cannot
be drawn from the fuel tank.
58
ZMU07445
TIP:
 When using the fuel tank on the boat, a fuel
1
 Check the boat's manual for the position of
EMU27495

Starting engine

EWM01601
Before starting the engine, make sure that
ZMU07455
the boat is tightly moored and that you can
steer clear of any obstructions. Be sure
there are no swimmers in the water near
you.
EMU27597
Electric start / prime start models
EWM01842
 Failure to attach the engine shut-off
1. Arrow
2. Primer pump
valve may also be equipped on the boat.
Open the fuel valve.
the fuel valve.
WARNING
WARNING
cord could result in a runaway boat if
operator is ejected. Attach the engine
shut-off cord to a secure place on your
clothing, or your arm or leg while oper-
ating. Do not attach the cord to clothing
that could tear loose. Do not route the
cord where it could become entangled,
preventing it from functioning.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

F90

Table of Contents