Table of Contents
Advertisement
After Installation
Make sure this manual and any other relevant documentation is given to the End User.
Operation
NOTE: At the end of a charging session, always disconnect the cable from the vehicle before
disconnecting from the charger.
Charger Status Indications
The charger status indicator is located above the charging socket.
No Light
Steady Blue
Flashing Blue
Steady Green
Flashing Green
Steady Red
Flashing Red
1. Make sure the Charge Status Indicator is illuminated Steady Blue.
2. Insert the cable into the vehicle first and then into the QubEV charger socket.
3. The Charge Status Indicator will illuminate Steady Green when charging is in progress.
4. To STOP charging, unplug the cable from the vehicle, and then from the QubEV charger.
QUBEV-UG-02 Installation and Operation Manual
September 2020
No power to charger or Charger fault.
Charger available and ready to be connected to vehicle.
Connection is okay.
Charging.
Charging complete.
Electric vehicle requires heat dissipation, STOP charging.
Fault – Not charging.
Operation
QubEV
Page 13 of 15
Advertisement
Table of Contents
