AGFA SNAPSCAN E42 Owner's Manual page 53

2 Position the original slide in the holder.
4
Close the document cover.
5 Click the ScanWise icon to start the program.
The Agfa ScanWise window opens.
6 Click the arrow on the Preview button to switch between transparencies and reflectives.
Transparent scanning:
Reflective scanning:
7 Click the Preview button (Mac only).
8
In case ScanWise has not automatically recognized the original, select the correct original
from the list.
9 Click the Scan button.
The negatives, transparencies or slides will be scanned.
# Note: Make sure the calibration area of the slide holder is NEVER covered. If the
calibration area is covered, the following message will appear:
# Note: If you are working on a PC, a similar message for PC will be displayed.
Chapter 7: Using the Transparency Module (SnapScan e52 only) 53