Durability; Care; Correct Storage, Transport And Disposal; Contact - probiker JAKUTSK Instructions For Use Manual

4.3 | Durability

The durability of the gloves depends on the type and duration of use, and
the degree of care. As a general principle, this PPE must be replaced
eight years from the date of manufacture, even if it does not appear to
be damaged. Some forms of damage are not always recognisable by
simple visual inspection.

4.4 | Care

Only use a damp cloth to remove any dirt. After cleaning your gloves,
treat them with suitable leather care products. We recommend refreshing
the impregnation of the outer material from time to time, depending on
usage.
You will find more care instructions on our website: www.louis.eu

4.5 | Correct storage, transport and disposal

The gloves must be stored in a dry and well-ventilated place. Do not
expose them to sunlight or direct heat sources.
The gloves must be protected against impacts under all circumstances,
and you should not place heavy objects on them. Avoid storing your
gloves in such a way that their own weight is carried by a few individual
points. After use, let your gloves air-dry at room temperature. Never use
a hairdryer or similar device, or place the gloves directly on a radiator, as
this may cause damage.
When transporting the gloves, do not leave them in a closed vehicle for
an extended period of time, and do not expose them to very high or very
low temperatures. Make sure that no heavy objects are placed on top of
the gloves during transportation.
The gloves were made using selected materials which are classified as
being harmless to humans according to current knowledge.
Gloves that are no longer usable must be disposed of in accordance with
the applicable environmental regulations, unless otherwise indicated.

5 | Contact

If you have any questions about the product and/or these instructions,
before using the product for the first time, please contact our Service
Centre by e-mail at: service@louis.eu. We will help you as quickly as
possible. This is the best way to ensure that your product is used
correctly.
As at: 07/2019