General Information; Eu Requirements - probiker JAKUTSK Instructions For Use Manual

1 | General information

1.1 | EU requirements

These gloves fulfill basic requirement of Safety and Health of the PPE
Regulation (EU) 2016/425. Conformity with the requirements set down
in this regulation has been proven by means of an EU type examination
performed by a notified body. You will find a list of notified bodies at the
beginning of these instructions for use.
You will find the identification number of the institute that performed the
EU type examination for the specific PPE in the product-specific section.
The following label is affixed to all protective gloves for motorcycle riders
in road traffic (hereinafter referred to as "gloves") and contains the
information described:
1
2
3
1 Specific symbol indicating
use of the gloves when
riding a motorcycle
2 Performance class
3 Knuckle protection
4 Trade name
5 Order number
Important note: We recommend leaving the label on the product to be
able to prove conformity with the applicable European regulation.
Conformity with the type test is ensured based on internal production
control. The EU Declaration of Conformity can be found online on the
specific product page of the website www.louis.eu.
Example
Highway 1 „Name"
20XXXX
1
KP
EN 13594:2015
6 Reference to
information material
7 Manufacturer's declaration
of conformity with Regulation
(EU) 2016/425
8 European standard
4
5
6
7
8