Advertisement
After 10 minutes of inaction in menu mode, the poi automatically turns itself off.
In timeline/picture mode the poi works until the battery is discharged.
When the battery is low, the LEDs blink red for 10 seconds. To maintain the lifetime of the battery
it's highly recommended to charge the JellyPoi the same day.
• To charge the JellyPoi plug them to USB-charger or computer – you will see a red light. You can
see the level of charge by position of the red light. On the figure below the position of the red
light roughly shows 30% charge.
When the poi is on charge, the red light slowly moves towards the end of the poi. When the
poi is completely charged, the light finally turns green.
• Lithium batteries don't have a memory effect, that is why we recommend to charge the poi
every time after using them; don't wait till they are totally discharged. If you charge the poi
every time, it makes the lifetime of the battery longer.
• Avoid deep discharge of your digital poi! Otherwise, it may result in loss of battery capacity
and reduction of working time.
Pictures can be uploaded into JellyPoi only by Bluetooth. Currently it works for Windows 10.
We are working on release for MacOS version, and finally it will work through an app for Android and
iOS (iPhone).
Uploading pictures into JellyPoi for Windows:
1. Plug a USB-Bluetooth adapter (comes with JellyPoi) into your PC with Windows 10. In the right
lower corner of the screen, in the task panel, you will see a Bluetooth icon.
with embed Bluetooth, then move to the next point.
2. Switch JellyPoi on.
Bluetooth connection JellyPoi to PC
Charging
3
If you have a laptop
Advertisement
