Page 1
Manual for LED digital poi Ignis Pixel JellyPoi Dear customer! Thank you for purchasing Ignis pixel poi. To make its lifetime as long as possible, as well as to keep the warranty valid, please read the instruction entirely and follow our advice.
Page 2
When you shift the cursor up above the timelines (blue cursor), there begins a row of 32 single images (red cursor). Single image mode can be useful, for example, for a photo session. On the photo below, the cursor is on 5 position.
Page 3
Charging • To charge the JellyPoi plug them to USB-charger or computer – you will see a red light. You can see the level of charge by position of the red light. On the figure below the position of the red light roughly shows 30% charge.
Connect to each JellyPoi by repeating all the previous steps. 6. Now launch Ignis Pixel Utility and wait to see JellyPoi in Device List – the right column. It may take up to one minute. If you still don’t see JellyPoi or some of them, then press Scan button.
Estimated lifetime of Ignis Pixel equipment is 5-10 years and limited only by battery life (like in mobile phones). If the battery becomes worthless, get in touch with us to replace it with a new one, or we can tell how to change it by yourself.