Table of Contents
Advertisement
3
Inspection and Maintenance
3.1 Maintenance
Owing to the modern Pneumatic Technique, the cutter is maintenance-free.
If any defects should appear, please contact the manufacturer.
Lubricate blade head friction
areas every 500 cuts. Dip it in
lubricating oil and pull the trigger
several times keeping the blades
in the oil. THIS WAY YOU WILL
OBTAIN OPTIMUM PERFORMANCE
OF THE BLADES DURING THEIR
USEFUL LIFE.
By installing a device to remove
water, adjust pressure and
lubricate air, the useful life of the
body and guides of the cutter is
remarkably lengthened.
7
Advertisement
Table of Contents
