Table of Contents
Advertisement
2
Start and Operation
2.1 Composition of the Cutter
16 Pneumatic Air Connection
15 First Handle
7 Second Handle
1 Cutter Head
21 Trigger
7 Suspension Device
2.2 Preliminary Operating Procedure
The cutter may be fastened by means of the suspension device (7) thus
enabling the stationary operation. A spring-traction device, e.g. with a carrying
force of min. 8 kg, is appropriate for this purpose.
Connect the pneumatic air by means of a plug-in coupling ¼''.
2.3 Operation of the Cutter
The cutter can be operated horizontally as well as vertically.
Always hold the cutter with two hands. This will make sure that your fingers
are not getting caught between the blades as well as ensure the safe holding
of the cutter.
See to it that the piece you are cutting is located completely within the blade.
The cutter blades (1) will close as soon as the trigger (21) is being actuated.
As soon as the trigger is being loosened, the cutter blades will – pneumatically
– open again.
6
Advertisement
Table of Contents
