Appendix G
Probewell Lab Inc. suggests that you respect the following recommendations to gain
maximum use of the MT-1/WT3 and its accessories for many years. Any
unauthorized modifications or broken seals will immediately void the warranty
and any further services.
MT-1/WT3
•
Do not try to open the MT-1/WT3 socket; there are no serviceable parts inside.
•
Never block the air vents on the MT-1/WT3 socket.
•
Never expose equipment to bad weather or direct rain.
•
Keep front jaws and rear tabs clean. Use lubricant for electric contacts. Do not
use abrasive materials.
•
Never use solvent to clean the MT-1/WT3. Use a soft moist cloth with non-
abrasive soap to clean surface.
•
Handle the MT-1/WT3 with care.
Metercam & Optical Pickup
•
Do not try to open; there are no serviceable parts inside.
•
Never expose equipment to bad weather or direct rain. Do not expose to direct
sunlight for long periods at a time.
•
Keep the back window of the Metercam and the suction cups clean. Do not use
abrasive materials. Use a soft moist cloth with non-abrasive soap to clean
surface. Use mineral oil to soften hardened suction cups.
•
Handle both pickups with care. Use one of the side pouches located inside the
carrying bag to store the Metercam and the optical pickup.
MT-1/WT3 User Guide
Recommendations
Page • 83