Safeguarding The Environment - Italinox DMG007 Installation, Operation And Maintenance Manual

3.2 RESIDUAL RISKS
The machine has several risks that were not completely
eliminated from a design stand point or with the installation of
adequate protection devices. For the Customer's complete
information, the residual risks remaining on the machine are
indicated below: such actions are to be considered incorrect
and therefore strictly forbidden.
DESCRIPTION OF HAZARDOUS
RESIDUAL RISK
The operator can slip due to water
Slipping or falling
or dirt on the floor
The
unintentionally
Burns
components inside the machine or
dishes at the outfeed without
using gloves or witout allowing
them to cool.
Contact with live parts during
Danger of electric maintenance operations carried
discharge out with the electrical panel
(Electrocution) powered. The operator intervenes
(wwith a power tool or without
disconnecting the power to the
machine) lying down on the floor.
During
Hear unusual noises
during maintenance or damage as
from the machine
a result of improper use of
accessory
Chemical hazard Contact with chemical substances
(e.g. Detergent, rinse aid, scale
remover, etc.) without taking
adequate
Therefore always refer to the
safety cards and labels on the
products used.
3.3 TECHNICAL DATA PLATE
6
SITUATION
operator deliberately or
touches some
the washing machine
safety precautions.
Meaning of fields given on the plate
M.Mod: Product model
Ser. No: Serial number
MKS: Manufacturer
Made in Turkey: Place of manufacture
EL: power supply, voltage, phase type
Hz: power supply frequency
kW: max. power input
EL: electrical
CE: CE marking
IP: degree of protection
When you request information on the device serial plate
informations are priority values to be your assistant.
4. SAFEGUARDING THE
ENVIRONMENT
4.1 PACKAGING
● All the packaging materials used are environmentally
friendly. They may be stored at no risk or burnt at an
authorised incineration plant. Plastic materials suitable for
recycling are marked with the following symbols:
Polyethtlene: External wrapping film, instructions booklet
bag and gas injectors bag.
Polypropylene: Top packaging panels and straps
Expanded polystyrene: Protective surround elements
4.2. USE
● Our appliances have been designed and prefected by
means of laboratory tests to guarantee high levels of
performance and efficiency. However, to minimise energy
consumption (electricity, gas and water), avoid using the
appliance under no-load conditions or conditions that impair
optimal performance, i.e. with the door open. We also
recommend preheating the appliance immediately prior to
use.
4.3 CLEANING
To minimise the emission of harmful substances into the
atmosphere, clean the appliance (externally and, where
necessary, internally) with products which are at least 90%
biodegradable.
4.4 DISPOSAL
● The appliances must be disposed of properly at the end of
its service life.
● Our appliances are made from 90% recyclable materials
(stainless steel, iron, aluminium, galvanised sheet steel, etc.).
These materials may therefore be recycled in accordance with
local waste disposal regulations at a conventional recycling
plant.
● Make the appliance unusable by cutting off the power cord.
Also remove any closure device fitted on the appliance to
prevent children from becoming trapped inside.