Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Italinox DMH005
Summary of Contents for Italinox DMH005
- Page 2 Dear User, Thank you for choosing Italinox glasswashers-dishwashers. This pass through hood glasswasher-dishwasher that you have selected has been designed to work for many years even at the busiest times of your business. Please read this manual for getting the maximum efficiency from your machine and also to use it easier.
-
Page 3: Table Of Contents
ITALINOX PASS THROUGH HOOD DISHWASHER INSTRUCTIONS FOR INSTALLATION AND USE CONTENTS Page Appliance identification MAIN CHARACTERISTICS Description of appliance Main components (exploded diagrams) Table 1: Technical data Precautions Safeguarding the environment INSTALLATION INSTRUCTIONS Installation place Positioning Electrical conection Water main connections... -
Page 4: Main Characteristics
The components marked by a hatched line are defined for For more detailed information about the model in your following models: possession, refer to “ Technical Data” table 1. “DMH005/DMH006” The appliance has the following features: IDENTIFICATIONS Automatic cleaning system running on the door is closed... - Page 5 TABLE 1: TECHNICAL DATA TITLES TYPE PROPERTIES BASKET SIZE (MM) 500 x 500 x 100 MODEL DMH005/DMH006 INPUT VOLTAGE (VOLT) 220 V OR 380 V (SEE TECHNICAL DATA PLATE OF YOUR DISHWASHER) FREQUENCY (HZ) ELECTRICITY CONSUMPTION (KW) 9,75 POWER SUPPLY CABLE SECTION...
-
Page 6: Precautions
● Repairs must only be carried out by authorised service PRECAUTIONS centres using original spare parts. Failure to comply with The following symbols are used in the manual to mark and this obligation may jeopardise the safety of the appliance identify the various types of hazards: and invalidate the guarantee. -
Page 7: Safeguarding The Environment
RESIDUAL RISKS Meaning of fields given on the plate The machine has several risks that were not completely M.Mod: Product model eliminated from a design stand point or with the installation of Ser. No: Serial number adequate protection devices. For the Customer’s complete MKS: Manufacturer information, the residual risks remaining on the machine are... -
Page 8: Installation Instructions
The symbol on the product indicates that this product INSTALLING THE POWER SUPPLY CABLE should not be treated as domestic waste, but must be To connect the power supply cable, proceed as follows: correctly disposed of in order to prevent possible negative ●The power cordis in the back right of the device output. -
Page 9: Safety Devices
5. SAFETY DEVICES The machine receives continuous water The appliance is fitted with the following safety devices: Reason: ●Pressure switch metering may be an issue. Boiler water to pour into the machine again, this work should be done. Resistance temperature safety thermostat(manual reset type) ●Pressure switch failure. -
Page 10: Instructions For Use
II. INSTRUCTIONS FOR USE USING THE APPLIANCE Before switching on the appliance, carefully read this 2.COMMISSIONING instructions manual which contains important information about correct and optimum use of the appliance. For further (Please refer to the shape of the control panel at the end of information about the performance characteristics and the booklet) washing machine consult your local dealer. -
Page 11: Turning Off The Appliance In The Event Of Faults
2.1 TURN OFF THE APPLIANCE MAINTENANCE, INSPECTIONS, CHECKS AND FREQUENCY At the end of day the device must be turned off from the CLEANING button "A". The light "B" will be off which indicates the power is off. These steps been fulfilled after the water is emptied in Routine cleaning the device. -
Page 12: Control Panel Figure
CONTROL PANEL Important: - On-Off And Program Switch The step by step instructions describing how to operate your - Power Lamp dishwasher is located at page 11, under II. INSTRUCTIONS FOR - Heat Lamp USE part. - Washing Lamp Make sure that you read the instructions before operating - Rinsing Lamp your dishwasher.
Need help?
Do you have a question about the DMH005 and is the answer not in the manual?
Questions and answers