Download
Share
Print this page
  1. Manuals
  2. Brands
  3. nimlok Manuals
  4. Monitor
  5. compact Pop-Up
  6. Setup instructions

nimlok compact Pop-Up Setup Instructions

Display and exhibition systems
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
PANELS IN
PANEL WRAP
COUNTER TOP
(Shown without protective
bag for illustration purposes.)
INSERT TOP INTO THE
PROTECTIVE BAG &
PLACE IT IN THE CASE
OPPOSITE THE
DOOR
FRAME
10' CURVED UNIT WITH LIGHTS & COUNTER
QUICK REFERENCE PACKING GUIDE FOR
SET UP INSTRUCTIONS
CASE-TO-COUNTER
OUTER PANEL
COUNTER BASE
LIGHT CARTON
CHANNEL BARS

Advertisement

loading

Summary of Contents for nimlok compact Pop-Up

  • Page 1 CASE-TO-COUNTER PANELS IN OUTER PANEL PANEL WRAP COUNTER TOP COUNTER BASE (Shown without protective bag for illustration purposes.) INSERT TOP INTO THE PROTECTIVE BAG & PLACE IT IN THE CASE OPPOSITE THE DOOR LIGHT CARTON CHANNEL BARS FRAME QUICK REFERENCE PACKING GUIDE FOR 10' CURVED UNIT WITH LIGHTS &...

  • Page 2: Opening The Frame

    OPENING THE FRAME 3 red Location Buttons should be positioned at the top of the frame. ATTACHING CHANNEL Individual Channel Bars BARS Individual Channel Bars snap into place as shown. Hinged Channel Bars 1) Hook Channel Bar into bottom hub. 2) Hook Channel Bar into top hub.
  • Page 3 ATTACHING PANELS To attach panels, start with Panel #1 on the left side of the unit, as you face the front of the unit. Panels hook onto red location buttons. Attaching Lights Unit may be tipped forward for easy Stabilizer Feet Light installation.
  • Page 4 CCK2 CASE-TO-COUNTER CONVERSION Start Case-To-Counter Outer Panel here. ASSEMBLING LIGHTED HEADERS 1) Attach Double-Bulb Fixture to the inside Frame hubs. 2) Assemble Header Frame, then roll on Lexan graphic overlay. 3) Hang Header on 'H' hooks located on the outside Frame hubs. LIGHT BOX ASSEMBLY 1) Attach Light Box backer.
  • Page 5 BUBBLE PANELS Attach the Double-Bulb Fixtures to the frame where the bubble panel will be placed. Apply the Bubble Panel's magnets to the Channel Bars and allow the panel to bow forward. FRAME SHADOWBOX ASSEMBLY After installing the Channel Bars, insert the Top &...

  • Page 6: Packing Instructions

    ALWAYS ROLL UP PANELS WITH FABRIC ROLL UP PANELS AND SECURE THE WRAP FACING FABRIC AND MAGNET FACING USING THE HOOK AND LOOP TAPE MAGNET. FASTENER. CCK2 Door Panel Off Set Panels By 3" Hook Tape Approx. 24" 2) Stack Panels largest to smallest & offset the panels by 1) Lay Panel Wrap logo down, with the Hook Tape side approximately 3".