Cleaning The Glass Cooktop - GE RB792DR Owner's Manual

Coil top and radiant top ranges
Table of Contents

Advertisement

Cleaning the glass cooktop.

Clean your cooktop after
each spill. Use CERAMA
BRYTE
Ceramic Cooktop
®
Cleaner.
Use a CERAMA BRYTE
Cleaning Pad
®
for Ceramic Cooktops.
The CERAMA BRYTE
Ceramic
®
Cooktop Scraper and all
recommended supplies are
available through our Parts
Center. See instructions under "To
Order Parts" section on next page.
NOTE: Do not use a dull or nicked
blade.
(on some models)
Normal Daily Use Cleaning
ONLy use CERAMA BRYTE
Ceramic Cooktop
®
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
Before using the cooktop for the first
time, clean it with CERAMA BRYTE
Ceramic Cooktop Cleaner. This helps
protect the top and makes cleanup
easier.
Daily use of CERAMA BRYTE
Cooktop Cleaner will help keep the
cooktop looking new.
Burned-On Residue
WARNING:
DAMAGE to your
glass surface may occur if you use scrub
pads other than those recommended.
Allow the cooktop to cool.
Spread a few drops of CERAMA BRYTE
Ceramic Cooktop Cleaner on the entire
burned residue area.
Using the included CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use a single-edge razor blade scraper
at approximately a 45° angle against
the glass surface and scrape the soil.
It will be necessary to apply pressure
to the razor scraper in order to
remove the residue.
After scraping with the razor scraper,
spread a few drops of CERAMA BRYTE
Ceramic Cooktop Cleaner on the entire
burned residue area. Use the CERAMA
BRYTE
Cleaning Pad to remove any
®
remaining residue.
Shake the cleaning cream well. Apply a
few drops of CERAMA BRYTE
Cooktop Cleaner directly to the cooktop.
Use a paper towel or CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
Use a dry cloth or paper towel to
®
remove all cleaning residue. No need
to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
Ceramic
®
thoroughly.
If any residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
Ceramic Cooktop Cleaner and a paper
®
towel.
®
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMA BRYTE
Ceramic Cooktop Cleaner and a paper
towel.
®
GEAppliances.com
Ceramic
®
®
®
®
29

Advertisement

Table of Contents
loading

Table of Contents