Advertisement
Description: the spray machine adopts fan nozzle, and the spray width is the same, keeping 400MM
wide all the time. The length and direction can be adjusted from 0 to 500 depending on the print
position of the picture on the T-shirt. The adjustment method is shown in the figure above
2.2.5Choose spray mode
The machine has two spray modes
One is in single jet mode, with the switch pointing to S position)
When users want a smaller amount of spray, they can choose the single spray mode. In the single
spray mode, press the start button and the sprinkler cart will stop spraying after it moves from the
origin to the setting length position.
When the start button is pressed for the second time, the spraying trolley will start to spray from the
position of setting length and stop spraying when it returns to the original position
The second is a dual spray mode, with the switch pointing to position D
Pre-Treatment machine operating instructions
- 13 -
The position of the hand
screw on the ruler is the
length of the spray on
the T-shirt
Advertisement
