Advertisement
Pre-Treatment machine operating instructions
Before the machine is used, it needs to clean the remaining pure water in the pipe. At this time, a
disposable cup can be placed under the nozzle, and then the cleaning button can be pressed, as
shown in the picture below：
Description: when the cleaning button is pressed, the liquid pump will start to work. The liquid
pump will take out the treatment liquid in the liquid bucket, and then spray out evenly through the
fan nozzle
At this time, according to the user's experience, when the injection solution is relatively pure, it can
stop and wait for the subsequent normal production work
2.2.4 Apply the fabricl for spray
Open the top bin door
- 10 -
Advertisement
