place.
•
The island trim is already fitted to the appliance
while the backguard can be purchased as a
separate kit.
•
If replacing the island trim with the backguard,
assemble it by using the same screws/spacers
used for fixing the island trim (figures 1.3a,
Island trim and backguard
1.3b).
It is mandatory to install and use the appliance with either
●
●
the island trim or the optional backguard correctly in place.
The island trim is already fitted to the appliance while the
●
●
backguard can be purchased as a separate kit.
If replacing the island trim with the backguard, assemble it
●
●
by using the same screws/spacers used for fixing the island
trim.
Grounded outlet
The electric cord with 4-prong ground plug
●
●
(NEMA 14-50P) shall have a minimum length
of 48" (1220mm) beyond the back of the
range.
FITTING THE OPTIONAL BACKGUARD
Fig. 1.3a
A
12 x
ISLAND TRIM AND BACKGUARD
B
•
It is mandatory to install and use the appliance
with the island trim or backguard correctly in
place.
•
The island trim is already fitted to the appliance
while the backguard can be purchased as a
Fig. 1.3b
separate kit.
•
If replacing the island trim with the backguard,
assemble it by using the same screws/spacers
used for fixing the island trim (figures 1.3a,
1.3b).
LOCATION OF ELECTRICAL SUPPLY
D
Fig. 1.3a
7
Left side
Final position of cooker against wall
of cavity
Fig. 1.3b
Floor
A
SUPPLY AREA DIMENSIONS
Distance from either edge of
A
Range to supply area
Height of electrical supply area
B
(from floor)
Width of electrical supply areas
C
Depth of supply area (ie
D
maximum protrusion of electrical
connection from wall)
*
Depending on adjustment of feet
C
Fig. 1.2
A
12 x
B
A
12 x
B
B
Electricity
C
A
inches (mm)
3/16" (5)
2 3/16" - 4 1/8" * (55-105)*
29 1/2" (749)
A
3 15/16" (100)
E
7
9