Advertisement
Quick Links
Advertisement
Related Manuals for REI HD6-600
Summary of Contents for REI HD6-600
- Page 1 HD6-600 Maintenance Quick Guide © 2022 Radio Engineering Industries, Inc.
-
Page 2: Table Of Contents
HD6-600 Maintenance Quick Guide Table of Contents 1 Introduction 2 System Maintenance Check 3 Laptop Setup when Using a Web User Interface 4 Conduct Ping Test to Verify Connectivity 5 HD6 Maintenance Check Off Sheet HD6 -600 Maintenance Quick Guide Radio Engineering Industries, Inc. -
Page 3: Introduction
HD6-600 Maintenance Quick Guide Introduction This document outlines the step-by-step process for conducting a system maintenance check for HD6- 600 DVRs. SERVICE HOT LINE USA & CANADA 1-877-726-4617 Toll Free 1-402-339-2200 HD6 -600 Maintenance Quick Guide Radio Engineering Industries, Inc. | 6534 L Street | Omaha, NE 68117 ©... -
Page 4: System Maintenance Check
HD6-600 Maintenance Quick Guide System Maintenance Check The vehicle must be powered on. Assure the DVR is in record mode by checking that the hard drive is locked in the DVR. The REC light is illuminated when this occurs. REC Light Indicates Record Mode is Active (HD5 Shown) The monitor video cable and the USB mouse should be plugged in the front of the DVR. - Page 5 HD6-600 Maintenance Quick Guide Video Should Appear on Active Channels Assure there is video appearing on all the activated channels. If a blue screen appears, it could be caused by the following: • The camera is not plugged in •...
- Page 6 HD6-600 Maintenance Quick Guide Checking Firmware Version The Event Marker/Panic Button illuminates when the DVR is recording. It can be verified that when the Panic button is pressed, it will be indicated as PB on the Info/Inputs field as depicted below.
- Page 7 HD6-600 Maintenance Quick Guide It is recommended that HDD storage is formatted at least annually. Formatting is performed by selecting Maintenance/Storage/Format/Clear HDD. If DVR usage is heavy, HDD formatting should occur more frequently. Warning: All video data will be lost during formatting.
-
Page 8: Laptop Setup When Using A Web User Interface
HD6-600 Maintenance Quick Guide Speed settings are made using the Speed Source drop-down menu on Setup>Speed window. The GPS and J1939 selections are the types of speed sources used by the DVR. Laptop Setup when Using a Web User Interface To configure the network adapter: Go to the Control Panel and in the upper right corner of the panel, set the View by: field to Small Icons. - Page 9 HD6-600 Maintenance Quick Guide Selecting Properties Select Internet Protocol Version 4 (TCP/IPv4) and select properties. Adapter Configuration Settings Configure adapter with settings as depicted above. Click OK to finalize. Connect ethernet cable to front port. HD6 -600 Maintenance Quick Guide Radio Engineering Industries, Inc.
-
Page 10: Conduct Ping Test To Verify Connectivity
HD6-600 Maintenance Quick Guide Conduct Ping Test to Verify Connectivity Open the command prompt. Searching for and Opening the Command Prompt Enter “ping 192.168.200.200” and press enter. This IP address is for the default LAN interface and cannot be changed. - Page 11 HD6-600 Maintenance Quick Guide Enter IP address at Prompt Successful Ping Test After the ping test is successful, the DVR web user interface can be accessed using Google Chrome or Microsoft Edge browser. The default password is 10231981. HD6 -600 Maintenance Quick Guide Radio Engineering Industries, Inc.
-
Page 12: Hd6 Maintenance Check Off Sheet
HD6-600 Maintenance Quick Guide Initial View of DVR Web User Interface HD6 Maintenance Check Off Sheet Hard Drive Locked DVR Recording Video on all channels Time and Date confirmed Firmware up to date Event marker/Panic Button light when DVR in Record mode... - Page 13 HD6-600 Maintenance Quick Guide Vehicle ID: Date: Technician: HD6 -600 Maintenance Quick Guide Radio Engineering Industries, Inc. | 6534 L Street | Omaha, NE 68117 © 2022 Radio Engineering Industries, Inc. 800.228.9275 | p: 402.339.2200 | f: 402.339.1704 | radioeng.com...