Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Before you install the appliance, please make sure that
a suitable disconnection switch is incorporated in the
●
permanent wiring, mounted and positioned to comply
with the local wiring rules and regulations. A means
of disconnection with at least a 3 mm air gap contact
separation in all poles must be incorporated into the
fixed wiring in accordance with the wiring rules, unless
the local wiring rules allow for alternative means.
the benchtop is made of a heat resistant material.
●
the power supply cable is not accessible through
●
cupboard doors or drawers.
there is adequate flow of cool air from the cabinetry
●
to the base of the cooktop. You may ventilate from
adjacent cupboards, but ensure that the available air
supply will not be restricted.
the ventilation area must be at least two 50mm diameter
●
holes or of an equivalent area.
the isolating switch is easily accessible by the customer.
●
you use heat-resistant and easy-to-clean finishes (such
●
as ceramic tiles) for the wall surfaces surrounding the
cooktop.
the cooktop will not be installed directly above a
●
dishwasher, fridge, freezer, washing machine or clothes
dryer, as the humidity may damage the cooktop
electronics.
2
1
SAFETY AND WARNINGS
IMPORTANT SAFETY INSTRUCTIONS
if the cooktop is installed above an oven, the oven has a
●
built-in cooling fan.
the installation will comply with all clearance
●
requirements and applicable standards and regulations.
you consult local building authorities and by-laws if in
●
doubt regarding installation.
When you install the appliance
We do not recommend you flush mount or seal this
●
appliance into the bench with silicone or glue. Doing so
will make future servicing difficult. Fisher & Paykel will
not be liable for any costs associated with removing or
replacing a sealed-in appliance, nor for repairing any
damage that may be incurred by doing this.
Seal exposed bare edges of the cutout with an oil-based
●
paint or moisture-proof polyurethane to prevent possible
moisture creeping between the cooktop trim and the
benchtop.
Take extreme care not to chip, crack, or break the top
●
glass surfaces during installation. A heavy metal tool or
part accidentally dropped on the glass could damage it.
If, after following the instructions given, correct
●
performance cannot be achieved, please contact your
nearest Fisher & Paykel Authorised Service Centre,
Customer Care, or contact us through our local website
listed at the end of this document.
Advertisement
Table of Contents
