sparkfun MicroMod DEV-18575 Hook-Up Manual page 31

project. Must be used in conjunction with a MicroMod
main board and processor.
MicroMod Environmental Function Board
Hookup Guide
The SparkFun MicroMod Environmental Function
Board adds additional sensing options to the MicroMod
Processor Boards. This function board includes three
sensors to monitor air quality (SGP40), humidity &
temperature (SHTC3), and CO2 concentrations
(STC31) in your indoor environment. To make it even
easier to use, all communication is over the MicroMod's
I2C bus! In this tutorial, we will go over how to connect
the board and read the sensors.
Better yet, try connecting a Qwiic-enabled device to the Main Board's Qwiic connector. Below are a few examples
from our tutorials that are tagged with Qwiic.
Qwiic HAT for Raspberry Pi Hookup Guide
Get started interfacing your Qwiic enabled boards with
your Raspberry Pi. This Qwiic connects the I2C bus
(GND, 3.3V, SDA, and SCL) on your Raspberry Pi to
an array of Qwiic connectors.
not have that capability. This special function board
acts as a coprocessor that takes advantage of
Espressif's ESP32 WROOM to add WiFi and
Bluetooth® to your applications.
MicroMod WiFi Function Board - DA16200
Hookup Guide
Add IoT functionality to any MicroMod project with the
MicroMod WiFi function Board - DA16200!
SparkFun SAMD21 Pro RF Hookup Guide
Using the super blazing, nay blinding, fast SAMD21
whipping clock cycles at 48MHz and the RFM96
module to connect to the Things Network (and other
Radio woodles).