Page 1
Aufbauanleitung / assembly instructions mod. S362 - S364 mit Frontauszug Bitte diese Aufbauanleitung sorgfältig aufbewahren! Please keep this assembly instructions safe! M6 x 30 M10 x 630 1.Montagematerial. 1. Fitting material. M6 x 30 2. Den Oberbau umgedreht auf gepolsterten Montageböcken ablegen.
Page 2
2. Put the base column onto the bolts. 3. Put the metal plate onto the bolts. 4. Fix it with 3 nuts. M6 x 30 4. Den Unterbau fixieren. 4. Fix the base. 2 / 6 S362 - S364 mit Frontauszug Änderungsdatum: 06.03.20...
Page 3
7. Vor dem Ausziehen auf beiden Seiten die 8. Fertig, ausgezogen. schwarzen Bremshebel lösen. 8. Ready, extended. 7. Before the extension can be pulled out, the two black levers must be released. 3 / 6 S362 - S364 mit Frontauszug Änderungsdatum: 06.03.20...
Page 4
For this purpose do the 10. … loosen the socket screw. Adjust the same steps as under No. 9 described. extenson-rod by turning the inner socket screw. Then tighten both outer socket screws again. 4 / 6 S362 - S364 mit Frontauszug Änderungsdatum: 06.03.20...
13c. Swing out the table-extension by using the 13c: Die Klappeinlage mit dem Ledergriff aus- leather belt. Check the hight again; if klappen, die Höhe rechts erneut kontrollie- necessary adjust again. ren und wenn nötig erneut einstellen. 5 / 6 S362 - S364 mit Frontauszug Änderungsdatum: 06.03.20...
Höhe kontrollieren. Ggf. erneut justieren. 14c. Swing in both pieces of the table-extension at once. Use the leather-belt to swing out the table- extension and check the hight again. If necessary, adjust again. 6 / 6 S362 - S364 mit Frontauszug Änderungsdatum: 06.03.20...