Advertisement
For Apartment Building HA D Series
Base Unit Number
VGDT18142W • VGDT18144W • VGDT18242W • VGDT18342W • VGDT18542W • VGDT18642W • VGDT18644W •
VGDT18742W • VGDB18142W • VGDB18144W • VGDB18542W • VGDB18642W • VGDB18644W
Call Sub-Base Unit Number
VGD13113W
Talk
(Base unit)
When called from the Main Entrance or Unit Entrance, you hear the call sound, an image of the visitor
appears on the screen, and the caller display flashes. (When called from the Building Manager Room,
the caller display lights up.)
When the door phone slave unit does not have a camera or you talk with the Building Manager Room, the screen turns blue.
•
1
Press the TALK button
After a beep, the caller display changes to lit.
2
Speak into the microphone
Conversation automatically ends about 1 minute
from the start.
A call from the Building Manager Room will end
automatically after about 4 minutes.
When the volume is too low (
Page 31)
Touch
twice → Touch
.
Volume is adjusted each time you touch
Unlocking the Main Entrance
(Luminous Unlock Button)
While talking with the caller at the Main Entrance, press
the Unlock button flashing in green.
OFF
The Main Entrance will be
unlocked.
When you press the Unlock
解錠
UNLOCK
button, the display on the
screen disappears in 5
seconds and conversation
Flashes when the door can be
automatically ends.
unlocked (luminous Unlock Button)
* The extension adapter for your dwelling unit (VGD8210) (sold separately) is
Internal call
(Base unit)
required to be installed on the Base Unit to connect the Call Sub-base Unit.
1
Press the TALK button
* Please see the reverse side for information on the operations of the call sub-base unit.
8A9 D56 00005
S0213-40315AB
Sim p le Guid e
3
Press the TALK button
After a beep, the display on the screen
disappears, and the conversation ends.
You can also press the OFF button to end
•
conversation.
If you do not press the TALK or the OFF
Note
button, sounds in the room will be
overheard.
For the base unit
Caller display
.
23
Page
Unlock
Button
TALK
button
* The figure indicates
Microphone
a typical model.
4
When the TALK button on the call
sub-base unit is pressed, you can talk
You can talk with the call sub-base unit from
•
which the response was made.
* Call sub-base units from which no response
was made will enter the standby state.
5
Press the TALK button on the base unit
or call sub-base unit to end the call
The call ends automatically about 1 minute after
•
it starts.
◎ T his document is a digest of the attached operation manual (CD-ROM). Refer to the attached
operation manual (CD-ROM) for details. (Example: The notation
page 23 of the attached operation manual (CD-ROM).)
◎ I nformation on the Apartment Building HA System is available. (As of July, 2014)
http://www2.panasonic.biz/es/densetsu/ha/mansion_ha/index.html
Security Functions
23
Page
For the security functions, refer to pages 152 to 154 and pages 167 to 177 of the attached operation
manual (CD-ROM).
Convenient Functions when Talking
Yuttari
You hear slower than the other party actually talks and
easily understand.
Touch
twice to display
then touch
.
Display will change from
•
To return to the original speed, touch
OFF Button
You can set to start conversation with
•
Page 126)
(
Excuse Function
This function plays the call sound or a baby's cry during
conversation to give you an excuse to end the conversation.
Touch
during the conversation.
Extension Function
You can extend conversation time about every minute.
Conversation can be extended up to about 3 minutes.
Touch
during the conversation.
41
Page
will start flashing about 50 seconds after you start talking.
•
In the Building Manager Room,
•
approximately 3 minutes and 50 seconds after talking begins.
Touch
during talking to talk for up to about 10 minutes.
Pretending to Be Out Function
When you do not want to answer a call, you can play an
absence message with the Pretending to Be Out Function.
Touch
while being called.
You can choose your absence message with the settings.
•
124 to 126)
Pages
(
You can delete
indicator with the settings.
•
124 to 126)
Pages
(
Page 23, means please refer to
32
Page
on the screen,
to
.
.
.
33
Page
33
Page
begins flashing
34
Page
Advertisement
