Advertisement
Using Your Compact Cold Pressed Juicer
USING YOUR electric wine set
CHARGING THE WINE OPENER AND WINE PRESERVER UNIT
NOTE:
It is recommended that the Wine Opener and Vacuum Wine Preserver Unit is charged for
at least 12 hours before using it for the first time.
Please follow the instructions for charging the unit below:
Connect the Power Plug into the Power Socket at the back of the Charging Base.
1
Place the Wine Opener and Vacuum Wine Preserver onto the Charging Base. Ensure that
2
the arrows on the Unit and Base align with each other so that the electrical connections are
made correctly.
Plug in the Charging Base. The LED Indicator Light will illuminate blue, indicating that the
3
battery is charging. It will take 10-12 hours to fully charge the battery.
4
To stop charging, remove the plug from the outlet. Remove the Power Plug from the
Charging Base.
5
The Wine Opener can be used to open up to 30 bottles when fully charged.
NOTE:
This Wine Opener has intelligent light features:
When battery power is low, the LED Indicator Light will flash blue when connected to
•
a power source.
When the unit is completely charged, the LED Indicator Light will be solid blue.
•
∙ 10 ∙
USING YOUR electric wine set
OPENING WINE BOTTLES
A
Before extracting the cork, please
1
remove any seal from the bottle using
the Foil Cutter provided
(photo
A).
B
Place the Wine Opener on top of the
2
wine bottle making sure that it remains
as upright as possible at all times. If
you hold the Wine Opener at an angle
to the bottle it will not remove the cork
properly
(photo
B).
∙ 11 ∙
∙ 11 ∙
Advertisement
