Denon DHT-S216 Quick Start Manual page 39

1. Version Display Mode (SOC(MTK))
1.1. Actions
SOC version information is displayed when the device is started in this mode.
1.2. Starting up
(1) While the power is On, hold down buttons "SOURCE", "VOL-" and "VOL+" for at least 4 seconds.
(2) SOC version is displayed by LED(White).
LED1 LED2
Version Region code Blinking x #
Region code : Blinking x #(1=E1C, 2=JP, 3=E2, 4=E3)
LED1
Front side
Example display
Version LED1 LED2
E2, Ver102 Blinking x 3 Blinking x 1
E2, Version : 3102 : Blinking : LED1 x3 → LED2 x1 → LED3 x0 → LED4 x2
JP, Version : 2021 : Blinking : LED1 x2 → LED2 x0 → LED3 x2 → LED4 x1
E3, Version : 4024 : Blinking : LED1 x4 → LED2 x0 → LED3 x2 → LED4 x4
2. Version Display Mode (HDMI)
1.1. Actions
HDMI version information is displayed when the device is started in this mode.
1.2. Starting up
1. While the power is On, hold down buttons "VOL-" and "VOL+" for at least 5 seconds.
(2) HDMI version is displayed by LED(Green).
LED1 LED2
Version Region code Blinking
Region code : Blinking x #(1=E1C, 2=JP, 3=E2, 4=E3)
LED1
Front side
LED3 LED4
Blinking x # Blinking x #
LED5
LED3 LED4
Blinking x 0 Blinking x 2
LED3 LED4
x # Blinking x # Blinking x #
LED5
3. Version Display Mode (BT)
1.1. Actions
Bluetooth version information is displayed when the device is started in this mode.
1.2. Starting up
1. While the power is On, hold down buttons "VOL-" and "VOL+" for 3 seconds.
(2) Bluetooth version is displayed by LED(Blue).
LED5 LED1
Non Version Region code
Region code : Blinking x #(1=E1C, 2=JP, 3=E2, 4=E3)
Front side
4. Initialization Mode
LED5
Non
(1) While the power is On, hold down buttons "POWER", "SOURCE" and "VOL+" for at least 5 seconds.
(2) All LEDs light up three times after initialization.
LED1
Step 1 Red
Step 2 Red
Step 3 Red
(3) Wait six seconds before turning on the power again.
LED5
Non
39
LED2 LED3 LED4
Blinking x # Blinking x # Blinking x #
LED1 LED5
LED2 LED3 LED4
Red Red Red
Red Red Red
Red Red Red
LED5
Non
LED5
Off
Off
Off