Table of Contents
Advertisement
Function Switch
1. Press FUNCTION button and you may switch in
3 modes of DVD, TUNING and AUX IN. The
sequence of mode switch is:
DVD
TUNING
AUX IN 2
AUX IN 1
Tuning
Before tuning, please connect AM and FM antenna
to "AM antenna input" port or "FM antenna input"
port according to system connections of page 9.
1. Press FUNCTION button to switch in tuning mode,
and press BAND button to select FM or AM.
2. Manual tuning: press TUNING+/- button and the
tuner searches radio stations upwards or downwards
by increasing or decreasing a frequency.
STANDBY
FUNCTION
TUNING +, -
SEARCH PREV/NEXT
BAND
3. Auto tuning: press SEARCH PREV/NEXT button
on the front panel or remote control, and the tuner
automatically searches radio stations upwards or
downwards. When radio station is searched, the
player stops searching. In FM band, search a
certain radio station shown in the following figure.
If you need listen to the next radio station, please
repeat the above operation.
Frequency
4. All auto tuning: press AUTO button, the tuner
automatically searches radio stations and saves
those searched in sequence.
NOTE
When selecting all auto tuning, the tuner
automatically searches radio stations and saves
those searched in sequence, and the previously
saved radio stations will be covered.
PRESET+/-
SAVE
AUTO
Stereo
18
BASIC OPERATION
Save Radio Station
This player may pre-save 20 FM and 20 AM radio stations.
Pre-save radio station:
1. According to the above tuning operation, if you
have searched a favourite radio station in AM band (as
the following figure):
Frequency
2. Press SAVE button to save it. When the radio station
number flashes, press PRESET +/- button and
the number increases or decrease to the position that
you want to save, such as "08", press SAVE button again
and you may save this radio station in "08" position.
3. If you want to save more radio stations, please repeat
the above operations.
NOTE
If the radio station has been saved, VFD screen
displays "MEM" as in the following figure.
Frequency
4. Listen to the saved radio station:
If you want to listen to the saved radio station, press
PRESET +/-
button or directly press NUMBER
button to select.
AUX IN Amplifying
1. According to the system connection figure, connect
the audio output terminal of external signal sources (such
as digital recorder, video tape recorder, CD player and
Mp3 player) to the corresponding audio input terminal
of this player.
2. According to audio input connections, press FUNCTION
button on the front panel or remote control to switch in
AUX IN 1 or AUX IN 2 mode, and now the VFD screen
displays as the following figure:
3. When external signal sources works normally and the
signals are correctly sent to this player, the AUX IN signals
can be amplified and volume can be adjusted through
remote control.
Number
MEM
Advertisement
Table of Contents
