Using Wi-Fi Location Demo - Panasonic PAN9026 Quick Start Manual


PAN9026 Wi-Fi/Bluetooth Module

5.6 Using Wi-Fi Location Demo

Additionally to acting as a Fine Time Measurement (FTM) responder, the PAN9026-IMX can
also be used as the initiator itself and make Round Trip Time (RTT) measurements. To
demonstrate this feature, the system contains the "WiFi Location Demo".
This section describes how to start and use the "WiFi Location Demo".
The following requirement must be met:
✓ A Wi-Fi access point (supporting FTM) is available and running.
A second PAN9026-IMX can be used as the responder in this setup.
1. Open WiFi Location Demo (1), located on the desktop.
Alternatively, the "WiFi Location Demo" can be started from the command line: Type in
/home/ubuntu/marvell/wifi_location_demo.sh and press Enter .
➔ A new terminal window will be opened.
➔ The application scans for Wi-Fi access points in reach and lists them (1).
2. Select the access point that should be used as the responder: Type in the according
index (2) and press Enter .
Quick Start Guide Rev. 1.2
5 Full Usage
Page 24 of 34