Login - Panasonic PAN9026 Quick Start Manual


PAN9026 Wi-Fi/Bluetooth Module
3. Insert the USB mouse into the USB hub (3).
4. Insert the USB keyboard into the USB hub (4).
5. Connect the serial port cable to the PC (5).
6. Insert headphones with a 3.5 mm jack into the green audio socket (6).
7. Insert the HDMI cable and connect it to an external HDMI monitor (7).
8. Insert the power supply (8).
➔ The system will boot up. This takes approximately one minute.
The boot process of the system is displayed on the attached monitor.
➔ When the boot process is finished, a login screen will be presented

5.2 Login

The following requirement must be met:
✓ The system is set up
When the boot process is finished, a login screen will be displayed.
1. Enter the password ubuntu (1).
2. Click Log In (2).
The username of the default user is "ubuntu" and the password is always
"ubuntu".
Quick Start Guide Rev. 1.2
If no output can be seen on the attached monitor, please reselect
the signal source to force the monitor to update the signal
sources.
 5.1 Setup
(Full).
5 Full Usage
 5.2
Login.
Page 21 of 34