How To Assemble - HOMCOM AA1-098 Using Instruction

How to assemble

A
C
B
Assemble the scooter
A- Unfold the steering column
Open the rapid tightening lever (11), and then pull the plastic folding Lever (5) upwards to
unlock the Folding Mechanism (10). Then lift the steering column (9) until it reaches the vertical
locking position (you should hear a "click" engagement), and then tighten the rapid tightening
lever (11) firmly.
B- Positioning handles
Take out the two handles (1) from the plastic handle holder under the rapid tightening lever of
handle (2), and insert them into handlebar stem (7) until it is locked in the holes. Check that the
two handle spring buttons (6) are effective and visible.
C- Adjust the height of the handlebar
Open rapid tightening lever of steering column (8), if you want adjust the height of the handle
bar, first press the steering column steering column spring button (3), then move the steering
column up and down until lock it in the hole, and last step is firmly tightening the rapid tightening
lever of steering column (8).
EN-4