Sennheiser MKH 20 Service Manual page 36

36/53
Controls
Technical Data
The values in parentheses apply to activated pre-attenuation (-10dB)
Acoustic principle _____________________ Pressure gradient/
Directional characteristic _______________ hyper-cardioid/lobe
Transmission range ___________________ 50 to 20000Hz
Free-field no-load transmission factor
at 1kHz ____________________________ 40mV/Pa (12.5mV/Pa)
Equivalent sound pressure level
according to DIN 45500, curve A_____ 9dB (16dB)
Equivalent sound pressure level
according to DIN 45405/CCIR 468____ 20dB (27dB)
Max. sound pressure level at 1kHz ________ 125dB (135dB)
Output _____________________________ balanced, transformer-free
Electrical impedance at 1kHz ____________ 150Ω
Min. terminating impedance ____________ 1000Ω
Pre-attenuation ______________________ 10dB, switchable
Low-cut filter (cut-off) _________________ 18dB/oct below 50Hz
Roll-off filter ________________________ additional 3dB reduction at 70Hz
Presence filter _______________________ 5dB emphasis at 10kHz
Plug-in connection ____________________ XLR3
Connector layout _____________________ 1: -, housing
Power supply ________________________ Phantom supply 48V
Supply voltage _______________________ 48V ±4V
Supply current _______________________ 2mA
Dimensions (in mm)___________________ 25 ∅ x 285
Weight _____________________________ approx. 150g
Scope of delivery _____________________ 1 microphone MKH 60-1 P 48
roll-off filter presence filter
switch for 10dB sensitivity reduction
interference receiver
2: +, AF+
3: +, AF-
MKH 60-1 P 48
04/2005