Sennheiser MKH 30 Product Sheet

MKH 30 P 48
Microphones |
General Description
The symmetrical transducer design of the figure-of-eight MKH 30 produces
an unusually wide and smooth frequency response. It is particularly suited
to soloists and small instrumental groups and can also serve as an 'S'
microphone in MS stereo applications. As a support microphone it is
particularly useful in the effective suppression of sounds from adjacent
sound sources.
Cable pictured is an accessory not supplied with the microphone
Features
High rejection of lateral sounds
Exceptionally low inherent self-noise
Symmetrical transducer technology ensures extremely low distortion
Transformerless and fully floating balanced output
Switchable roll-off filter to compensate for proximity effects at a
distance of approx. 0.5 m
Switchable pre-attenuation
Black, anodised light metal body
Delivery includes: 1 MKH 30, 1 MZS 80 shock mount,
1 MZW 41 windshield
Recommended Accessories
MZA 14 P 48 U battery power supply unit
MZT 441 table stand
MZT 100 table stand
MZD 30 dual clip, for MS stereo
MZB 415 fish pole
MZS 80 shock mount
MZW 41 foam windshield
MZP 40 popshield
MZS 20-1 shock mount
MZW 20-1 basket windshield
MZH 20-1 hairy cover
RF Symmetrical Capsule
Condenser Microphone
Cat. No. 002960
Cat. No. 000799
Cat. No. 001883
Cat. No. 002990
Cat. No. 000972
Cat. No. 003685
Cat. No. 029681
Cat. No. 003132
Cat. No. 003609
Cat. No. 003606
Cat. No. 003610
Technical Data
Pick-up pattern ..........................................................figure-of-eight
Frequency response ................................................. 40 – 20,000 Hz
Sensitivity (free field, no load, 1 kHz)......... 25 (8) mV/Pa ± 1dB
Nominal impedance ................................................................. 150 Ω
Min. terminating impedance ..................................................... 1 kΩ
Equivalent noise level
A-weighted (DIN IEC 651)............................................... 13 (19) dB
CCIR-weighted (CCIR 468-3)........................................... 22 (28) dB
Max. sound pressure level ......................... 134 (142) dB at 1 kHz
Power supply ........................................................phantom 48 ± 4 V
Supply current............................................................................. 2 mA
Dimensions ................................................................ Ø 25 x 174 mm
Weight ...........................................................................approx. 110 g
Values in parentheses with attenuator switched on (–10 dB)
Effect of switchable roll-off filter
Profile
Figure-of-eight studio directional microphone with switch-
able pre-attenuation and switchable roll-off filter. Frequency
response 40 – 20,000 Hz, sensitivity (free field, no load)
25 (8) mV/Pa ± 1 dB at 1 kHz, nominal impedance 150 Ω,
min. terminating impedance 1 kΩ, equivalent noise level
A-weighted 13 (19) dB, CCIR-weighted 22 (28) dB, max. SPL
134 (142) dB at 1 kHz, phantom powering 48 ± 4 V, supply
current 2 mA, dimensions Ø 25 x 174 mm, weight approx. 110 g.
Values in parentheses with attenuator switched on (–10 dB).
Cat. No. 002872