Advertisement
Quick Links
30W COB Rechargeable
Worklight
Powerful 30W COB
floodlight with dual power
source produces super
bright light up to 2800
lumen with wide spread
illumination
This floodlight works with
two power source:
• 115/220V AC
• Rechargeable Li ion
Battery
Aluminum die cast housing
in premium power coated
finish with Rubberised
Edge Guard making it
Impact Resistant
IK07 Rated
Protected against impact
of 0.5 kg mass dropped
from 400 mm height
Detachable 7.4V 4400
mAh rechargeable Li-ion
battery pack and can also
be used a power bank
Comes with detachable
magnet base to latch onto
any metallic surface
Can be mounted on tripod
for outdoor sites
CHARGING
WATER & DUST
TIME
PROOF RATING
3HRS
IP54
POWER SOURCE
115/220V AC
5V USB CABLE
SPECIFICATIONS
POWER
Rechargeable
SOURCE
Li-ion Battery
Two Modes:
WORKING
1) 100% Intensity
MODES
2) 50% intensity
1) 100% Intensity: 2800 Lm
LUMEN
2) 50% Intensity: 1400 Lm
1) 100% Intensity: 2 hrs
RUN TIME
2) 50% Intensity: 4 hrs
AC Supply
One Mode:
100% Intensity
100% Intensity: 2800 Lm
-
INSTRUCTION MANUAL
S2880, REV B
RoHs
IK07
30W COB
floodlight
Rubberised
Edge Guard
Knob to
secure
attachment in
place
Detachable
Magnetic Base
1
Advertisement
Related Manuals for Matco Tools MWLFL2800
Summary of Contents for Matco Tools MWLFL2800
- Page 1 INSTRUCTION MANUAL S2880, REV B 30W COB Rechargeable Worklight RoHs Powerful 30W COB floodlight with dual power source produces super bright light up to 2800 lumen with wide spread IK07 illumination This floodlight works with two power source: • 115/220V AC •...
- Page 2 SAFETY INFORMATION Light • Check for damaged parts and any other Adjusting Knob conditions that may affect the operation of this product. Replace damaged parts Bracket immediately. Magnetic • Do not use the lamp in the immediate vicinity Handle of inflammable materials or gases. •...
- Page 3 USE WITH AC POWER 1. Remove the battery from the light by MAINTENANCE opening both the locks on the top and • Before cleaning the LED worklight, bottom of the battery. disconnect the USB cable(if being charged) and allow the worklight to cool down sufficiently.
Need help?
Do you have a question about the MWLFL2800 and is the answer not in the manual?
Questions and answers