HELVAR LL1x150-CR-DA Manual

LL1x150-CR-DA
150 W Dimmable DALI-2 LED driver
• DALI-2 certified LED driver, 1-100 % dimming range
• Very low flicker output complying with IEEE 1789 recommendations
• Suitable for flicker-free camera recording applications
• Very high efficiency up to 96 %
• Wide operating temperature range for various environments
• Suitable for DC use
• Long lifetime up to 100 000 h
• Driver protection Class I
• Suitable for closed luminaires where protection done with luminaire
construction (Class I or II)
• Helvar Driver Configurator support

Functional Description

• Adjustable constant current output: 350 mA (default) to 700 mA
• Current setting programmable via DALI or with external resistors
• Filtered dimming for high-quality light in every application
• Latest technology Switch-Control 2 functionality for easy-to-use intensity control
• Adaptive LED overload protection, reduces output current if overvoltage is detected
• Full load recognition with automatic recovery, open and short circuit protection
• Multipurpose terminal Iset/NTC for current setting or overtemperature protection
• Constant Light Output (CLO), adjustable up to 100 000 h (default disabled)

Mains Characteristics

Voltage range
DC range
starting voltage
Mains current at full load
Frequency
Stand-by power consumption
THD at full power
Leakage current to earth
Tested surge protection
Tested fast transient protection
Insulation between circuits & driver case
Mains circuit - Output
DALI circuit - Output
Mains circuit - DALI circuit
Mains, DALI and output - Driver case
Load Output
Output current (I )
out
Accuracy
Ripple
PstLM
SVM
U (max) (abnormal)
out
Outrush current
I
out
P (max)
out
U
out
PF (λ) at full load
Efficiency (η) at full load
Helvar
| Helvar Oy Ab, Keilaranta 5 FI-02150 Espoo, Finland. Data is subject to change without notice. www.helvar.com
–
198 VAC
Withstands max. 330 VAC (max. 1 hour)
–
176 VDC
> 190 VDC
0.53 - 0.71 A
–
0 / 50 Hz
< 0.5 W
< 10 %
< 0.5 mA
1 kV L-N, 2 kV L-GND (IEC 61000-4-5)
2 kV (IEC 61000-4-4)
Non-isolated
Basic insulation
Basic insulation
Basic insulation
350 mA (default)
± 5 %
< 2 %* at ≤ 120 Hz
< 0.02*
< 0.01*
400 V
1100 mA*
*) When starting driver with short-circuited load or connecting load to running driver
350 mA 700 mA
122.5 W 150 W
–
257 V 350 V 128 V
0.97
96 % 95 %
Product code: 5790
150 W 220 – 240 V 0 / 50 – 60 Hz
264 VAC
280 VDC
60 Hz
–
700 mA
*) Low frequency, LED load: Cree XM-L LEDs
*) At full power, measured with Cree XP-G LED modules.
–
214 V
0.98
T22 121 1E 04.04.2022 1/6