HELVAR LC45iC-DA-100-900 Manual

LC45iC-DA-100-900
45 W Dimmable two channel intelligent Colour LED driver
• 2-channel tunable white for human centric lighting
• Wide dynamic range of colour temperatures on all dimming levels *
• Amplitude dimming for the highest quality light output, complying
with IEEE 1789 recommendation
• NFC technology for wireless programming
• Suitable for use in emergency lighting applications
• Suitable for Class I and Class II luminaires
• Optional strain relief for independent use outside of luminaire (LC-
SRB and LC-SRB-LOOP) and driving Class III luminaires
• Helvar Driver Configurator support
*) See pages 2-3 for details
Functional Description
• DALI Type 8 compatible. One DALI address for controlling colour temperature by two output channels
• DALI colour type: Colour temperature T
• Adjustable constant current output: 100 mA to 900 mA (350 mA default current)
• Current setting programmable via NFC or DALI
• Suitable for flicker-free camera recording applications
• Patented Switch-Control 2 functionality for easy-to-use intensity and colour temperature control with single push button
• Full load recognition with automatic recovery, open and short circuit protection
• Constant Light Output (CLO), adjustable up to 100 000 h (default disabled)
• Energy consumption monitor (real time), running hour monitor (accumulative), energy management (accumulative)
• Memory bank for OEM customer data
Mains Characteristics
Nominal rated voltage range
AC voltage range
DC voltage range
DC starting voltage
Mains current at full load
Frequency
Stand-by power consumption
THD at full power
Tested surge protection
Tested fast transient protection
Insulation between circuits & driver case
Mains circuit - SELV circuit
DALI circuit - SELV circuit
Mains circuit - DALI circuit
Mains, DALI and output - Driver case
Mains input - Ground input
Load Output (SELV <60 V)
Output current (I )
out
Accuracy
Ripple
PstLM
SVM
U (max) (abnormal)
out
I
LED*
P
Rated*
U
LED*
PF (λ) at full load
Efficiency (η) at full load
*Current and power are divided into two channels according to the chosen CCT and module specifications. Total maximum power of the
two channels can't exceed given P
Helvar
| Helvar Oy Ab, Keilaranta 5 FI-02150 Espoo, Finland. Data is subject to change without notice. www.helvar.com
TUNABLE WHITE
c
220 V
198 VAC
Withstands max. 320 VAC (max. 1 hour)
Withstands min. 176 VAC (max. 1 hour)
176 VDC
> 190 VDC
< 0.24 A
0 / 50 Hz
< 0.5 W
< 15 %
1 kV L-N, 2 kV L-GND (IEC 61000-4-5)
2 kV (IEC 61000-4-4)
Double/reinforced insulation
Double/reinforced insulation
Basic insulation
Double/reinforced insulation
Basic insulation
100 mA
± 5 %*
< 1 %** at ≤ 120 Hz
< 0.15*
< 0.01*
60 V
100 mA
5 W
12 – 50 V
0.67
66 %
.
Rated
–
240 V, 0 / 50 – 60 Hz
–
264 VAC
–
280 VDC
–
60 Hz
–
900 mA
*) At maximum current **) Low frequency, LED load: Cree XP-G LED
*) At full power, measured with Cree XP-G LED modules.
350 mA (default) 900 mA
17.5 W
12 – 50 V
12
0.89
83 %
Product code: 5765
45 W 220 – 240 V 0/ 50 – 60 Hz
s
45 W
–
50 V
0.97
88 %
T22 187 1A 23.06.2022 1/7