HELVAR LL60/2-E-DA-iC Manual

LL60/2-E-DA-iC
60 W Dimmable two channel intelligent Colour LED driver
• 2-channel tunable white for human centric lighting
• Colour temperatures adjustable on all dimming levels
• High efficiency up to 90 %
• Low current ripple
• Suitable for DC use
• Long lifetime up to 100 000 h
• Driver protection Class II
• Suitable for Class I and Class II luminaires
• For driving Class III (SELV) luminaires, optional strain relief available
for independent use outside of luminaire (LL1x2135-SR)

Functional Description

• DALI Type 8 compatible. One DALI address for controlling colour temperature by two output channels
• DALI colour type: Colour temperature T
• Adjustable constant current output: 350 mA (default) to 700 mA
• Current setting with external resistors
• Patented Switch-Control funtionality for easy-to-use intensity and colour temperature control with single push button
• Overload, open & short circuit protection
• NTC terminal for overtemperature protection
• Helvar Driver Configurator Support
• Power consumption monitor (real time), running hour monitor (accumulative), energy management (accumulative)

Mains Characteristics

Voltage range
DC range
starting voltage
Mains current at full load
Frequency
Stand-by power consumption
THD at full power
Leakage current to earth
Tested surge protection
Tested fast transient protection
Insulation between circuits & driver case
Mains circuit - SELV circuit
DALI circuit - SELV circuit
Mains circuit - DALI circuit
Mains circuit - Driver case
Load Output (SELV <120 V)
Output current (I )
out
Accuracy
Ripple
U (max) (abnormal)
out
I
out*
P
OUT(MAX)*
U
OUT
PF (λ) at full load
Efficiency (η) at full load
*Current and power are divided into two channels according to the chosen CCT and module specifications. Total maximum power of the two channels can't exceed given P
Helvar
| Helvar Oy Ab, Keilaranta 5 FI-02150 Espoo, Finland. Data is subject to change without notice. www.helvar.com
c
–
198 VAC 264 VAC
Withstands max. 320 VAC (max. 1 hour)
–
176 VDC 280 VDC
> 190 VDC
0.26 – 0.34 A
–
0 / 50 Hz 60 Hz
< 0.5 W
< 12 %
< 0.4 mA
1 kV L-N, 2 kV L-GND (IEC 61000-4-5)
4 kV (IEC 61000-4-4)
Double/reinforced insulation
Double/reinforced insulation
Basic insulation
Double/reinforced insulation
350 mA (default)
± 5 %
< 2 %* at ≤ 120 Hz
*) Low frequency, LED load: Cree XP-G LEDs
120 V
350 mA 700 mA
35 W 60 W
25 – 100 V 25 – 85 V
0.98 0.98
89 % 90 %
Product code: 5533
60 W 220 – 240 V 0 / 50 – 60 Hz
–
700 mA
.
OUT(MAX)
T22 043 1C 27.11.2018 1/6