Assembly - Flowzone CONCRETE+ STORM 2.5 Operation Manual

ASSEMBLY

PART A: ASSEMBLING YOUR NEW SPRAYER
1. Remove the nuts and
bolts (5), holsters (4), and
nozzles (12, 13, 14) from the
tank strainer (3). Set aside.
2. Bring the ComfortStraps™
(6) to the bottom of the
tank (2). Secure the lower
strap clips to the loops at
the bottom of the tank.
3. Next, slide the adjustable
strap through the top tank
loop. Continue by sliding
the strap under
over the buckle fitting.
Lightly tug to make sure
the strap is secure.
Repeat on other side.
FZVACD-2.5
CONCRETE+ STORM 2.5
OPERATION GUIDE
4. If the shoulder straps
arrive detached, attach
the bottom
adjustable buckle using
the same method as
before.
and
1.
to the
3.
2.
4.
© WESSOL, LLC 2022
8