Unlocking The Scanner - AGFA SnapScan e20 Owner's Manual

Unlocking the Scanner

Before you start using the scanner, you first have to unlock it.
1 Place the scanner on a horizontal, flat surface and pull it carefully towards you until you can
see the locking screw at the bottom.
2 Rotate the locking screw in the direction of
Your scanner is unlocked.
!
Note: If you want to transport your scanner, you have to lock it. To do this, first connect the AC
adapter to the scanner so that its optical assembly moves to its home position. Then, rotate the
locking screw in the direction of
and ready for transportation.
Caution: Make sure to install the ScanWise software before connecting the scanner to your PC or
Macintosh computer.
.
and disconnect the scanner. Your scanner is now locked
Chapter 1: Preparing the Scanner 13