1. Manuals
  2. Brands
  3. Stabila Manuals
  4. Laser Level
  5. OLS 26
  6. Operating instructions manual

Stabila OLS 26 Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OLS 26
Operating instructions
en

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OLS 26 and is the answer not in the manual?

Questions and answers

Related Manuals for Stabila OLS 26

Summary of Contents for Stabila OLS 26

  • Page 1 OLS 26 Operating instructions...

  • Page 4: Main Components

    Operating instructions The STABILA OLS 26 level can be used for many types of measurement on the building site. It can be used for the optical transfer of heights as well as measuring distances and angles. We have endeavoured to explain the unit‘s handling and functioning in as clear and comprehensible manner as possible.

  • Page 5: Setting Up The Telescope

    Levelling the instrument: The OLS 26 is aligned by turning the adjusting screws (1). The bubble of the circular vial (7) must be precisely in the centre. If the bubble in the vial moves outside the central ring when the OLS 26 is rotated through 180°, the circular vial must be adjusted.

  • Page 6: Measuring Distances

    Working with the level Measuring heights 1. Place the level as close as possible to the mid-point between Example: 2 measuring points and level the 2,218 m instrument. 2. Align the level with measuring point A and read off the figure A1. 3.

  • Page 7: Measuring Angles

    Example: 80° Checking the calibration The OLS 26 level is designed for use on construction sites and was perfectly adjusted when it left our factory. As with any precision instrument, however, its calibration must be regularly checked. The unit should be checked before starting any new tasks, particularly when the unit has been exposed to strong vibrations.

  • Page 8: Adjusting The Reticle

    4. Set up the instrument and level it in front of the levelling rod A (distance approximately 1m) Example: 5. Align the instrument with measuring 2,007 m point A and read off the figure A2 on the measuring point. 6. Align the instrument with measuring point B and read off the figure B2 on the measuring point.

  • Page 9: Technical Data

    24 months from the date of purchase. This guarantee is valid worldwide. STABILA has the right to decide at its own discretion whether the defects will be rectified by being repaired or whether the instrument will be replaced. STABILA accepts no further liability.

Table of Contents